Compiled and submitted by: Robert Fridman
Last change: November, 2004
You can download this list as PDF document
and as Excel sheet.
This list is a breakdown of the costs of individual parts required to build
a BD-4 airframe from plans. The prices are from Aircraft
Spruce and Van's.
If an exact match could not be found, an approximation to a simmilar part
was used.
This list comes from the "Bill of Materials"
page. The "Bill of Materials" list was sorted by description and
duplicates eliminated. Where possible, identical components from different
sections were grouped together.
Obviously, this document needs to be maintained, to reflect an up-to-date
approximation. Please contact us if
you have any corrections or additions to this list. If you do want to the
maintenance of this document please download the Excel
sheet and make your editions there. Then send it in. We will make it available
on the site. Thank you!
| Cost per Unit | Cost per Kit | ||||
| 1-A-001 | 0.75 | .75" Round, 6061-T6 (feet) | 0.00 | ||
| 1-A-005 | 1 | 12 Volt Battery | 100.00 | 100.00 | |
| 1-A-006 | 2 | 12" Flexible Hose, Brake Cylinder | 0.00 | ||
| 1-A-007 | 1 | 4130 Steel Sheet .090" x 3.0" x 12" | 0.00 | ||
| 1-A-008 | 2 | 5" Flexible Hose Brake | 0.00 | ||
| 1-A-023 | 1 | 76 degree angle, 96" long x .063 2024-T3 | 0.00 | ||
| 1-A-024 | 0.41 | Aileron Assembly 1-1/4"O.D. x .120" 4130 (feet) | 0.00 | ||
| 1-A-025 | 0.16 | Aileron Assembly 1-3/8"O.D. x .058" 4130 (feet) | 0.00 | ||
| 1-G-036 | 0.25 | Aileron Bellcrank Retainer 1-5/8"O.D. x .065" (feet) | 0.00 | ||
| 1-G-037 | 7 | Aileron Bolts AN3-17A | 0.30 | 2.10 | |
| 1-H-106 | 2 | Aileron Skins, Alclad .025" 2024-T3 | 0.00 | ||
| 1-H-107 | 0.5 | Aileron Spacers 1-1/8" x .035" 6061-T6 (feet) | 0.00 | ||
| 1-H-108 | 2 | Aileron Torque Tubes 12' long x 1"O.D. x .065" 2024-T3 | 5.30 | 10.60 | |
| 1-H-114 | 1 | Alum. Plate .5" x 1.0" x 1.0" | 7.70 | 7.70 | |
| 1-H-122 | 2 | Alum. Square Tubing 750" x .062" x 30" long 6063-T5 | 2.99 | 5.98 | |
| 1-H-123 | 40 | Aluminum 1/4" tubing x .035"wall 5052-0 (feet) | 2.00 | 80.00 | |
| 1-H-125 | 8 | Aluminum Flanged Bushings 3/8" x 1/2" x 3/16" | 0.00 | ||
| 1-H-126 | 1 | Angle 30" long, 1" x 1" x .063 2024-T3 | 0.00 | ||
| 1-H-127 | 1 | Anti-Servo Tab 3-1/4" long x .020" 2024-T3 | 0.00 | ||
| 1-H-129 | 200 | Avex Countersunk rivets 1604-0412 | 0.26 | 52.00 | |
| 1-H-138 | 2409 | Avex Rivets 1601-0410 | 0.26 | 626.34 | |
| 1-H-139 | 2 | Axle Nuts AN7502-24 | 10.00 | 20.00 | |
| 1-H-140 | 2 | Axles Main Landing Gear | 60.00 | 120.00 | |
| 1-A-147 | 10 | Ball Bearings, Aileron and Flap | 0.00 | ||
| 1-A-148 | 2 | Ball Bearings, Fafnir KP6A | |||
| 1-A-149 | 2 | Ball End Single Shank MS20664 | 0.00 | ||
| 1-H-202 | 5 | Barrel AN155-32S | 0.00 | ||
| 1-G-218 | 1 | Battery Box (material 18" x 36" x .032" 6061-0 | 0.00 | ||
| 1-G-283 | 20 | Battery Cable (feet) | 1.00 | 20.00 | |
| 1-G-317 | 8 | Battery Cable Connectors | 1.00 | 8.00 | |
| 1-G-318 | 1 | Bearing Tube 1.2500" x .045" wall 3.4" | 0.00 | ||
| 1-H-319 | 4 | Bearings AA-628-6 1/2"I.D. x 5/8"O.D. | 0.00 | ||
| 1-H-320 | 4 | Bearings FF310-3 | 0.00 | ||
| 1-H-338 | 2 | Bearings, Nylon No. 105 | 0.00 | ||
| 1-H-339 | 18 | Bolts AN3-10A | 0.16 | 2.88 | |
| 1-H-340 | 25 | Bolts AN3-11A | 0.18 | 4.50 | |
| 1-H-342 | 5 | Bolts AN3-12A | 0.18 | 0.90 | |
| 1-H-343 | 1 | Bolts AN3-13A | 0.13 | 0.13 | |
| 1-H-344 | 4 | Bolts AN3-14A | 0.20 | 0.80 | |
| 2-B-002 | 2 | Bolts AN3-15 | 0.36 | 0.72 | |
| 2-B-003 | 2 | Bolts AN3-21A | 0.34 | 0.68 | |
| 2-B-028 | 365 | Bolts AN3-4A | 0.14 | 51.10 | |
| 2-B-030 | 118 | Bolts AN3-5A | 0.07 | 8.26 | |
| 2-B-045 | 4 | Bolts AN3-6 | 0.31 | 1.24 | |
| 2-G-048 | 56 | Bolts AN3-6A | 0.07 | 3.92 | |
| 2-G-049 | 2 | Bolts AN4-10A | 0.12 | 0.24 | |
| 2-H-142 | 16 | Bolts AN4-11A | 0.19 | 3.04 | |
| 2-G-330 | 1 | Bolts AN4-12 | 0.31 | 0.31 | |
| 2-H-331 | 1 | Bolts AN4-13 | 0.39 | 0.39 | |
| 2-H-332 | 1 | Bolts AN4-14 | 0.42 | 0.42 | |
| 2-H-333 | 8 | Bolts AN4-14A | 0.26 | 2.08 | |
| 2-H-334 | 4 | Bolts AN4-17 | 0.45 | 1.80 | |
| 2-H-335 | 4 | Bolts AN4-17A | 0.34 | 1.36 | |
| 2-H-336 | 1 | Bolts AN4-22 | 0.41 | 0.41 | |
| 2-H-337 | 1 | Bolts AN4-26 | 0.36 | 0.36 | |
| 3-B-009 | 4 | Bolts AN4-5A | 0.24 | 0.96 | |
| 3-B-010 | 6 | Bolts AN4-6 | 0.32 | 1.92 | |
| 3-C-011 | 4 | Bolts AN4-6A | 0.30 | 1.20 | |
| 3-C-018 | 7 | Bolts AN4-7 | 0.31 | 2.17 | |
| 3-C-019 | 14 | Bolts AN4-7A | 0.22 | 3.08 | |
| 3-C-020 | 2 | Bolts AN5-10A | 0.17 | 0.34 | |
| 3-B-026 | 8 | Bolts AN6-23A (Cleveland Wheels) | 0.80 | 6.40 | |
| 3-B-027 | 1 | Bolts AN8-27A | 2.50 | 2.50 | |
| 3-C-029 | 4 | Box-open 40" long x .063"(2) & Box-open 58" long x .063"(2) 2024-T3 | 0.00 | ||
| 3-C-033 | 2 | Brake Assembly (Cleveland) | 280.00 | 560.00 | |
| 3-G-040 | 2 | Bronze Bearings Upper Aileron Bellcrank, Oilite FF-1505 | 0.00 | ||
| 3-B-043 | 2 | Cement, 3M 2210 (quarts) | 0.00 | ||
| 3-B-044 | 1 | Center Section Tube 5-1/2" long x 6.00"I.D. 2024-T3 Aluminum | 300.00 | 300.00 | |
| 3-C-074 | 1 | Channel 60" long, 1" x 2" x .063 2024-T3 | 0.00 | ||
| 3-B-080 | 4 | Channels 84" 2024-T3 (???) | 0.00 | ||
| 3-E-098 | 4 | Check Nut AN316-4 | 0.12 | 0.48 | |
| 3-H-099 | 8 | Check Nuts AN315-3 | 0.06 | 0.48 | |
| 3-C-100 | 5 | Circuit Breakers, (2)7 amp., (2)10 amp., (1)50 amp | 20.00 | 100.00 | |
| 3-H-104 | 2 | Clamp Brake System AN742-D4 | 0.15 | 0.30 | |
| 3-H-124 | 2 | Clevis Bolts AN23-31A | 0.75 | 1.50 | |
| 3-H-133 | 2 | Clevis Bolts AN23-34A | 1.26 | 2.52 | |
| 3-H-135 | 3 | Clevis Pin AN392-21 | 0.29 | 0.87 | |
| 3-H-143 | 2 | Clevis Rod End AN481-10 | 9.75 | 19.50 | |
| 3-H-146 | 2 | Clevis Rod End AN486-2 (adj.) | 0.00 | ||
| 3-G-173 | 1 | Control Bracket material 12" x 48" x .040" 2024-T3 | 0.00 | ||
| 3-G-176 | 1 | Control Bracket Material 20" long x 2" x 2-1/2" x 1/8" 6061-T6 | 0.00 | ||
| 3-G-177 | 50 | Control Cable 1/8" diameter (feet) | 0.25 | 12.50 | |
| 3-G-178 | 18 | Control Stick & Mass balance & flap handle 7/8"O.D. x .049" 4130 (feet) | 1.58 | 28.44 | |
| 3-H-179 | 13 | Control Stick Crossover flaps rear seat 1-1/8"O.D. x .058" 4130 (feet) | 2.15 | 27.95 | |
| 3-H-180 | 12 | Control Stick interconnect aileron & rudder push-pull rod 1/2"O.D. x .035"wall 4130 (feet) | 1.65 | 19.80 | |
| 3-H-181 | 3.33 | Control System Bolts Bushings 5/16"O.D. x .035"wall 4130 (feet) | 1.71 | 5.69 | |
| 3-H-182 | 40 | Cotter Pin 3/4" AN380-2-3 | 0.04 | 1.60 | |
| 3-H-183 | 4 | Cotter Pin AN380-3-4 | 0.05 | 0.20 | |
| 3-H-184 | 10 | Cotter Pins AN280-2-2 | 0.02 | 0.20 | |
| 3-H-185 | 2 | Cotter Pins Main Gear Axle AN380-4-8 | 0.08 | 0.16 | |
| 3-H-186 | 11 | Countersunk Nut Plates | 0.50 | 5.50 | |
| 3-H-187 | 50 | Countersunk Rivet MS20426-3-4 | 0.26 | 13.00 | |
| 3-H-188 | 2 | Door Knobs | 0.00 | ||
| 3-G-189 | 2 | Door Latch H-7215J | 0.00 | ||
| 3-H-190 | 1 | Doubler 2024-T3 Alclad .050" x 2.0" x 12.0" | 0.00 | ||
| 3-H-191 | 6 | Elbows AN822-6D | 3.92 | 23.52 | |
| 3-H-276 | 6 | Elbows AN833-6D | 5.70 | 34.20 | |
| 3-H-277 | 4 | Elbows AN837-6D | 4.40 | 17.60 | |
| 3-H-278 | 12 | Elevator Push-pull rod 2"O.D. x .035" 6061-T6 (feet) | 3.00 | 36.00 | |
| 3-H-279 | 1 | Elevator Rear Spar Channel 7' long x .032" 2024-T3 | 0.00 | ||
| 3-H-280 | 8 | Elevator ribs, Alclad .025" 2024-T3 | 0.00 | ||
| 3-G-281 | 2 | Elevator Skins 62" long x 42" x .020" 2024-T3 | 0.00 | ||
| 3-H-282 | 1 | Elevator Skins, rear Section, Alclad .020" 2024-T3 | 0.00 | ||
| 3-H-294 | 7 | Elevator Spar 7' long x 2-1/2"O.D. x .125" 6061-T6 | 6.00 | 42.00 | |
| 3-H-295 | 2 | Engine Flexible Fuel Hose, (1)24", (1)18" | 0.00 | ||
| 3-H-297 | 4 | Engine Mount Bolts AN6-27 | 0.81 | 3.24 | |
| 3-H-298 | 1 | Engine Mount Bracket 4.5"long x 1-3/4" x 2-1/4" x .125" 6061-T6 | 0.00 | ||
| 3-C-306 | 22 | Engine Mount Tubing 3/4"O.D. x .049" 4130 (feet) | 3.70 | 81.40 | |
| 3-G-308 | 5 | Engine Mount, Steel 4130, 5/8"O.D. x .065" wall (feet) | 0.00 | ||
| 3-G-309 | 5 | Eye AN170-32LS | 7.85 | 39.25 | |
| 3-G-316 | 3 | Eye AN170-32RS | 8.70 | 26.10 | |
| 3-G-345 | 1 | Flap Handle Spring | 0.00 | ||
| 3-G-346 | 2 | Flap Pins | 0.00 | ||
| 3-G-347 | 2 | Flap Skins, Alclad .025" 2024-T3 | 0.00 | ||
| 3-C-348 | 2 | Flush Gas Caps | 75.00 | 150.00 | |
| 3-C-349 | 2 | Fork AN161-23RS | 8.00 | 16.00 | |
| 3-C-350 | 1 | Formed Rudder Skin SK-50 | 0.00 | ||
| 3-C-351 | 24 | Fuel Line Tubing 3/8"O.D. x .035" (feet) | 0.67 | 16.08 | |
| 3-C-352 | 1 | Fuel Sealant (pt) | 0.00 | ||
| 3-C-353 | 1 | Fuel Sloshing Material (gal) | 0.00 | ||
| 3-C-354 | 2 | Fuel Tank Transmitters | 0.00 | ||
| 3-H-355 | 1 | Fuel Valve | 0.00 | ||
| 3-H-356 | 1 | Fuselage 122 degree angle, 46" long x .063 2024-T3 | 0.00 | ||
| 3-H-357 | 10 | Fuselage Angle 1" x 1" x .063" 2024-T3 | 0.00 | ||
| 3-H-358 | 11 | Fuselage Angle 1-1/2" x 1-1/2" x .063" 2024-T3 | 0.00 | ||
| 3-H-359 | 5 | Fuselage Angle 2" x 2" x .063" 2024-T3 | 0.00 | ||
| 3-H-360 | 1 | Fuselage V Angle, 41.5" long x .063 2024-T3 | 0.00 | ||
| 3-G-361 | 1 | Gang Channel 52 LHTG-51-02-J8, 18" long | 0.00 | ||
| 3-G-362 | 2 | Gang Channel 52LHTG51-02-J12 42"long | 0.00 | ||
| 3-H-363 | 1.5 | Gang Channel 52LHTG-51-02-J16 (feet) | 0.00 | ||
| 3-H-365 | 1 | Gasket MS28778-6 | 0.00 | ||
| 3-H-366 | 1 | Gasket MS29512-6 | 0.00 | ||
| 3-C-367 | 3 | Gusset Material 2' x 4' x .063" (24 sq.ft.) 2024-T3 | 0.00 | ||
| 3-C-368 | 1 | Hardwood Block 3/4" x 2" x 12" | 0.00 | ||
| 3-C-369 | 1200 | Hex Nuts MS21040-3 | 0.12 | 144.00 | |
| 3-C-370 | 12 | Heyco Bushings OCB-500 | 0.00 | ||
| 3-C-371 | 10 | Heyco Bushings SB-250 | 0.00 | ||
| 3-H-372 | 1 | Hinge 48" MS20257-3 | 13.20 | 13.20 | |
| 3-H-373 | 1 | Hinge MS20001-12, 5" | 10.00 | 10.00 | |
| 4-D-032 | 1 | Key Ignition Switch | 0.00 | ||
| 4-G-038 | 0.75 | Landing Gear Material 1"O.D. x .065" 4130 (feet) | 0.00 | ||
| 4-G-039 | 1 | Lead Mass Balance Material, 25 lbs. | 0.00 | ||
| 4-G-046 | 1 | Leading Edge Skin SK-53 | 0.00 | ||
| 4-D-047 | 3 | Lord Landing gear rubber mounts | 0.00 | ||
| 4-D-051 | 3 | Machine Screws AN520-10R14 | 0.60 | 1.80 | |
| 4-D-052 | 6 | Mahogany Aileron Ribs | 0.00 | ||
| 4-D-053 | 12 | Mahogany Ribs | 0.00 | ||
| 4-D-054 | 1 | Mahogany Wood Trim Wheel | 0.00 | ||
| 4-D-055 | 1 | Main Gear Structure 42"long x 5-3/8" x .063" 2024-T3 | 0.00 | ||
| 4-G-075 | 1 | Main Gear Structure Top 42"long x 5-3/8" x .063" 2024-T3 | 0.00 | ||
| 4-G-076 | 2 | Main Landing Gear Struts 36"long x 5" x 1" 2024-T3 | 0.00 | ||
| 4-F-112 | 2 | Master Brake Cylinder | 100.00 | 200.00 | |
| 4-H-137 | 2 | Micarta Bearing Material 6" x 6" x 1/4" | 0.00 | ||
| 4-H-141 | 24 | Molded Fiberglass "Panel Ribs" | 0.00 | ||
| 4-H-145 | 2 | Molded Fiberglass "Wing Panel End Ribs" | 0.00 | ||
| 4-G-155 | 60 | Molding Seal Strip | 0.00 | ||
| 4-G-156 | 1 | Nav. Light - Tail | 90.00 | 90.00 | |
| 4-D-157 | 2 | Nav. Lights - Wing Tip | 100.00 | 200.00 | |
| 4-D-158 | 16 | Nico press sleeves 18-3-M | 0.18 | 2.88 | |
| 4-D-159 | 1 | Nipple AN816-6 | 2.50 | 2.50 | |
| 4-H-161 | 2 | Nipples AN816-4D | 1.06 | 2.12 | |
| 4-H-162 | 2 | Nipples AN816-6D | 1.39 | 2.78 | |
| 4-H-163 | 300 | No. 18 Wire (feet) | 0.15 | 45.00 | |
| 4-H-164 | 50 | No. 8 Electrical Wire (feet) | 0.38 | 19.00 | |
| 4-H-165 | 1 | Nose Gear Shock Absorber 1" diameter | 0.00 | ||
| 4-H-166 | 1 | Nose Gear Strut 48"long x 1-1/2"O.D. x .125" | 0.00 | ||
| 4-G-167 | 1 | Nose Wheel Assembly with 8" Wheel and Tire | 160.00 | 160.00 | |
| 4-H-187 | 40 | Nut Clips LHA4972-8-82 | 0.36 | 14.40 | |
| 4-G-219 | 1 | Nut Plate 52LHTA51M-02BC | 0.00 | ||
| 4-H-220 | 1 | Nut Plate 52LHTA575M-02BC | 0.00 | ||
| 4-H-221 | 40 | Nut Plate AN366F-1032 | 2.60 | 104.00 | |
| 4-H-284 | 5 | Nut Plate MS21078-4 | 9.98 | 49.90 | |
| 4-H-285 | 8 | Nutplates NAS681-A08K | 2.00 | 16.00 | |
| 4-G-286 | 6 | Nutplates NAS697-A08K | 2.00 | 12.00 | |
| 4-G-287 | 10 | Nutplates, AN366-F1032 | 2.00 | 20.00 | |
| 4-G-293 | 25 | Nuts AN310-3 | 0.35 | 8.75 | |
| 4-G-302 | 26 | Nuts AN310-4 | 0.47 | 12.22 | |
| 4-G-303 | 4 | Nuts AN310-6 | 0.77 | 3.08 | |
| 4-G-328 | 6 | Nuts AN316-5 | 0.16 | 0.96 | |
| 4-G-373 | 1 | Nuts AN364-820 | 0.29 | 0.29 | |
| 5-E-050 | 152 | Nuts AN364-832 | 0.09 | 13.68 | |
| 5-E-088 | 80 | Nuts AN365-428 | 0.12 | 9.60 | |
| 5-E-089 | 18 | Nuts AN365-524 | 0.20 | 3.60 | |
| 5-E-090 | 12 | Nuts AN365-624 | 0.22 | 2.64 | |
| 5-E-091 | 1 | Nuts AN6289D6 | 0.00 | ||
| 5-E-093 | 10 | Nuts AN818-4D | 0.39 | 3.90 | |
| 5-E-094 | 16 | Nuts AN818-6D | 0.55 | 8.80 | |
| 5-E-095 | 4 | Nuts AN924-4D | 0.37 | 1.48 | |
| 5-E-097 | 10 | Nuts AN924-6D | 0.63 | 6.30 | |
| 5-G-101 | 4 | Oilite Bearings FF-620-1 | 1.08 | 4.32 | |
| 5-H-102 | 150 | Phillips recessed, 1/4" No.8 Type B Truss head (MS35190-221?) | 0.11 | 16.50 | |
| 5-H-103 | 1 | Piano Hinge MS20257-P2, 48" long x 1-1/16" | 9.50 | 9.50 | |
| 5-F-111 | 4 | Pin AN394-25 | 0.22 | 0.88 | |
| 5-F-113 | 2 | Pin Clevis MS20392-1C55 | 8.30 | 16.60 | |
| 5-F-115 | 2 | Pin Cotte MS24665-132 | 0.02 | 0.04 | |
| 5-H-116 | 2 | Pins MS20392-3C-29 | 0.30 | 0.60 | |
| 5-H-117 | 1 | Plastic Connector 1/4" x 1/4"I.D. TC-7044 | 0.00 | ||
| 5-H-118 | 2 | Plastic Elbow 1/8" pipe x 1/4" tube I.D. TE-2024 | 0.00 | ||
| 5-H-119 | 1 | Plastic Tee 1/8" pipe x 1/4" x 1/4" tube I.D., T.T.-3244 | 0.00 | ||
| 5-H-120 | 30 | Plastic Tubing 1/4"I.D. (feet) | 0.00 | ||
| 5-H-128 | 2 | Plate 1/4" x 8" x 10" 2024-T3 | 0.00 | ||
| 5-H-130 | 4 | Plate, 1/2" x 1" x 4" 2024-T3 | 0.00 | ||
| 5-H-131 | 1 | Plexiglass Sheet - Side Windows 4' x 5' x .080" | 88.00 | 88.00 | |
| 5-H-150 | 1 | Plexiglass Windshield' (slanted) | 400.00 | 400.00 | |
| 5-H-153 | 2 | Plywood Floor 3/8" x 12" x 18" (pieces) | 0.00 | ||
| 5-H-154 | 1 | Primer | 0.00 | ||
| 5-H-192 | 1 | Primer Lines and Fittings (1 set) | 0.00 | ||
| 5-H-193 | 3 | Pulley AN210-1B | 0.00 | ||
| 5-H-194 | 4 | Pulleys AN210-3A | 0.00 | ||
| 5-H-195 | 1 | Recording Tachometer and Cable | 0.00 | ||
| 5-H-196 | 1 | Retainer 2024-T3, Alclad .032 x 2.0" x 4.0" | 0.00 | ||
| 5-H-197 | 1 | Ring MS28777-6 | 0.00 | ||
| 5-H-198 | 200 | Rivet MS20470-3-3 | 0.26 | 52.00 | |
| 5-H-199 | 30 | Rivets CCR264SS-3-1 | 0.26 | 7.80 | |
| 5-G-200 | 1 | Rod End AN490-HT11 | 0.00 | ||
| 5-H-201 | 2 | Rod End Bearing - Helm F44-14 | 30.00 | 60.00 | |
| 5-H-203 | 1 | Rod End Bearing - Helm F45-19 | 30.00 | 30.00 | |
| 5-H-204 | 2 | Rod End Bearing Flaps, Heil HM-5 | 30.00 | 60.00 | |
| 5-H-205 | 2 | Rod End Bearing Heim F-34-14 | 30.00 | 60.00 | |
| 5-H-206 | 6 | Rod End Threaded AN490-HT8 | 30.00 | 180.00 | |
| 5-H-207 | 12 | Roll Pins 1/8" x 1.00" | 0.00 | ||
| 5-H-208 | 5 | Round Bar-Steel 1/2"O.D. 4130 (feet) | 0.00 | ||
| 5-H-209 | 1.33 | Round Bar-Steel 3/8"O.D. 4130 (feet) | 0.00 | ||
| 5-H-210 | 1 | RTV Cement | 0.00 | ||
| 5-H-211 | 2 | Rudder Pedal Spring | 0.00 | ||
| 5-H-212 | 14 | Rudder Pedal Tubing 3/4"O.D. x .065" (feet) | 1.67 | 23.38 | |
| 5-H-213 | 1 | Rudder Top Material - Balsa Wood | 0.00 | ||
| 5-H-214 | 1 | Safety Wire (25 feet) | 10.00 | 10.00 | |
| 5-H-289 | 40 | Screws AN507C832R6 | 0.12 | 4.80 | |
| 5-H-292 | 308 | Screws AN509-10R10 | 0.12 | 36.96 | |
| 5-H-305 | 20 | Screws AN509-10R11 | 0.10 | 2.00 | |
| 5-H-307 | 28 | Screws AN509-10R12 | 0.10 | 2.80 | |
| 5-H-312 | 8 | Screws AN509-10R14 | 0.15 | 1.20 | |
| 5-H-313 | 6 | Screws AN509-10R15 | 0.12 | 0.72 | |
| 5-H-327 | 4 | Screws AN509-10R31 | 0.12 | 0.48 | |
| 5-H-374 | 653 | Screws AN509-10R7 | 0.08 | 52.24 | |
| 5-E-375 | 150 | Screws AN509-8R10 | 0.10 | 15.00 | |
| 6-A-035 | 8 | Screws AN509-8R6 | 0.07 | 0.56 | |
| 6-A-041 | 2 | Screws AN515-8R16 | 0.12 | 0.24 | |
| 6-A-042 | 6 | Screws AN515-8R6 | 0.07 | 0.42 | |
| 6-B-060 | 12 | Screws AN520-10R12 | 0.25 | 3.00 | |
| 6-C-061 | 80 | Screws, Sheet Metal NAS384-6-10P | 0.16 | 12.80 | |
| 6-B-062 | 2 | Seat Backs | 0.00 | ||
| 6-G-063 | 3 | Seat Belts (3 sets) | 0.00 | ||
| 6-G-064 | 16 | Shackles AN115-32 | 11.60 | 185.60 | |
| 6-G-065 | 1 | Sheet 18" x 18" x .063" 4130 | 0.00 | ||
| 6-G-066 | 2 | Sheet 18" x 18" x .125" 4130 | 0.00 | ||
| 6-G-067 | 3 | Sheet Alclad 4' x 12' x .020" 2024-T3 | 180.00 | 540.00 | |
| 6-G-068 | 1 | Sheet Alclad 8" x 8" x .063" 2024-T3 | 320.00 | 320.00 | |
| 6-I-069 | 2 | Sheet Alclat 4' x 12' x .016" 2024-T3 | 140.00 | 280.00 | |
| 6-I-070 | 1 | Sheet Aluminum .025" x 18" x 30" 2024-T3 | 0.00 | ||
| 6-I-071 | 1 | Sheet Aluminum .025" x 24" x 48" 2024-T3 | 0.00 | ||
| 6-I-072 | 1 | Sheet Aluminum .025" x 30" x 60" 2024-T3 | 0.00 | ||
| 6-I-073 | 1 | Sheet Aluminum .032" x 12" x 48" 2024-T3 | 0.00 | ||
| 6-I-079 | 1 | Sheet Steel 2" x 12" x .063" 4130 | 0.00 | ||
| 6-F-082 | 1 | Sheet Steel 2" x 3" x .125" 4130 | 0.00 | ||
| 6-F-084 | 2 | Side Channels 62.25" long x 6" x 2" 2024-T3 | 0.00 | ||
| 6-B-087 | 10 | Sleeves AN819-4D | 0.33 | 3.30 | |
| 6-I-168 | 16 | Sleeves AN819-6D | 0.39 | 6.24 | |
| 6-G-169 | 1 | Sound Insulating Material, 10 sq. yds. | 0.00 | ||
| 6-H-170 | 1 | Spacer Wood 1/2" x 1.6" x 4.0" | 0.00 | ||
| 6-H-171 | 1 | Spar Rudder SK-54 | 0.00 | ||
| 6-H-172 | 2 | Spar Tubes, 10' long x 6.680"O.D. x 6.410"I.D. 2024-T3 | 500.00 | 1000.00 | |
| 6-H-216 | 1 | Spar, Forward, Vertical Stablizer SK-51 | 0.00 | ||
| 6-H-222 | 1 | Spar, Rear, Vertical Stablizer SK-52 | 0.00 | ||
| 6-H-223 | 1 | Spring Trim | 0.00 | ||
| 6-H-224 | 0.83 | Square Steel Tubing 1/2" x 1/2" x .035" (feet) | 2.75 | 2.28 | |
| 6-H-225 | 0.16 | Square Steel Tubing 3/4" x 3/4" x .049" (feet) | 4.45 | 0.71 | |
| 6-H-226 | 0.83 | Square Steel Tubing 5/8" x 5/8" x .049" (feet) | 4.85 | 4.03 | |
| 6-H-227 | 30 | Square Tubing 3/4" x 3/4" x .035" 4130 (feet) | 3.50 | 105.00 | |
| 6-H-228 | 2 | Stabilizer Tips | 0.00 | ||
| 6-H-229 | 1 | Stainless Steel Material, Firewall Skin .016" | 468.00 | 468.00 | |
| 6-H-231 | 1.1 | Steel 3/16"O.D. x .035" 4130 (feet) | 0.00 | ||
| 6-H-232 | 50 | Steel Cable and Trim System 1/16" dia. (feet) | 0.15 | 7.50 | |
| 6-H-233 | 2.33 | Steel Engine Mount tubing 1/2"O.D. x .065" 4130 (feet) | 0.00 | ||
| 6-H-234 | 0.5 | Steel Rod 1/4" (feet) | 0.00 | ||
| 6-H-235 | 0.33 | Steel Rod 3/16" (feet) | 0.00 | ||
| 6-H-236 | 1 | Steel Rod 3/16" dia. x 364" long 4130 | 0.00 | ||
| 6-H-237 | 1 | Steel Sheet .050" x 3" x 4" 4130 | 0.00 | ||
| 6-H-238 | 1 | Steel Tube 1.0"O.D. x .065" wall x 9" | 0.00 | ||
| 6-H-239 | 1 | Steel Tube 3/8"O.D. x .049" x 2' long 4130 | 0.00 | ||
| 6-G-240 | 0.83 | Steel Tubing 1/4"O.D. x .028" wall (feet) | 0.00 | ||
| 6-G-241 | 3.33 | Steel Tubing 1-1/2" x .035" (feet) | 0.00 | ||
| 6-G-242 | 0.5 | Steel Tubing 1-5/8" x .058" (feet) | 0.00 | ||
| 6-G-243 | 1 | Structural Bonding Epoxy 2216 A&B | 0.00 | ||
| 6-G-244 | 5 | Switches | 10.00 | 50.00 | |
| 6-G-245 | 2 | Tees AN824-6D | 4.45 | 8.90 | |
| 6-G-246 | 16 | Thimbles AN100-4 | 0.10 | 1.60 | |
| 6-G-247 | 2 | Tires and Tubes 6:00 x 6 x 15" | 140.00 | 280.00 | |
| 6-G-248 | 3 | Tubing 5/8" x .065" wall 4130 (feet) | 0.00 | ||
| 6-G-250 | 1 | Tubing 7/8"O.D. x .049" wall x 3-1/4" 4130 | 0.00 | ||
| 6-H-251 | 1 | Tubing Square 3/4" x 3/4" x .049" wall x 9.5" 4130 | 0.00 | ||
| 6-G-290 | 1 | Union Flared Tube AN815-6D | 2.35 | 2.35 | |
| 6-G-291 | 4 | Unions AN615-4D | 0.00 | ||
| 6-H-310 | 4 | Unions AN832-4D | 2.50 | 10.00 | |
| 6-G-311 | 2 | Washer AN960-4L | 0.02 | 0.04 | |
| 6-H-321 | 28 | Washers AN690-616 | 0.03 | 0.84 | |
| 6-H-322 | 650 | Washers AN960-10 | 0.03 | 19.50 | |
| 6-H-323 | 10 | Washers AN960-1016 | 0.09 | 0.90 | |
| 6-H-325 | 410 | Washers AN960-10L | 0.03 | 12.30 | |
| 6-H-326 | 135 | Washers AN960-416 | 0.03 | 4.05 | |
| 6-H-378 | 22 | Washers AN960-516 | 0.03 | 0.66 | |
| 6-H-369 | 150 | Washers AN960-8 | 0.01 | 1.50 | |
| 6-G-380 | 13 | Washers AN960-816 | 0.04 | 0.52 | |
| 6-G-381 | 2 | Washers AN960-8L | 0.01 | 0.02 | |
| 6-G-383 | 2 | Washers AN970-3 | 0.05 | 0.10 | |
| 6-H-384 | 6 | Washers, AN960-8 | 0.01 | 0.06 | |
| 6-H-385 | 80 | Washers, Countersunk Finishing NAS391-6P | 0.10 | 8.00 | |
| 6-H-386 | 2 | Wheels 6:00 x 6 assemblies | 70.00 | 140.00 | |
| 6-H-387 | 2 | Wing Flexible Fuel Hose, 24" | 0.00 | ||
| 6-H-388 | 2 | Wing Flexible Fuel Hose, 42" | 0.00 | ||
| 6-H-389 | 26 | Wing Spar Clamps | 0.00 | ||
| 6-H-390 | 2 | Wing Tips | 0.00 | ||
| 6-H-392 | 2 | Wood Round | 0.00 | ||
| 6-H-393 | 100 | Wood Screws No.432 PK66A4-5 | 0.00 | ||
| TOTAL | 8544.63 | ||||