This page contains pictures of details to support the understanding of the plans and to see how other builders solved a specific detail. The builder for each picture is named.
) Windshield fairing (Steve Craigle) |
) Windshield (Steve Craigle) |
) Windshield fairing (Steve Craigle) |
) Aileron & flaps actuator (Steve Craigle) |
) Flap & aileron (Steve Craigle) |
) Fuel vent (Steve Craigle) (see fuel vent page) |
) Wing tip (Steve Craigle) |
) Header Tank (Steve Craigle) |
) Panel with yokes (John Steere) |
) Long center spar ("Super Tube" from Dream Aircraft) (Carlos Serodio) |
) Front wheel (Carlos Serodio) |
) Rudder trim tab (Carlos Serodio) |
) Windshield (Carlos Serodio) |
) Inner fuselage (looking from towards the empennage; the wooden walls are specific to Howard's project) (Holger Stephan) |
) Panel and yoke option (Holger Stephan) |
) A windshield defroster (Holger Stephan) |
) Elevator control mechanism (Holger Stephan) |
) Fairing (Ken Kopp) |
) Fairing (Ken Kopp) |
) Fairing (Ken Kopp) |
) Fairing (Ken Kopp) |
) Folding wing mechanism (Bede Corp) |
) Ray Ward's V8 installation From: "Aircraft Powerplant Handbook", C.A.A. Technical Manual No. 107, EAA, 1993 (reprint), ISBN: 0-940000-90-3 |
) Bobby Lunsford
|
){kind=link}